Corrosion tables and charts

Explore corrosion tables in the Steel Finder

Steel Finder

Corrosion table data

The tables are mainly based on results of laboratory tests, carried out with pure chemicals and water solutions nearly saturated with air. It must be pointed out that the corrosion rate can be quite different if the solution is free from oxygen
All concentrations are given in weight-% and the solvent is water if nothing else is shown. The corrosion data apply to annealed materials with normal microstructure and clean surfaces. Laboratory tests are not strictly comparable with actual service conditions, where the corroding medium often contains impurities. These may in some cases increase corrosion, in others decrease it. In unfavorable cases, the increase can be very great. Before making the final selection of material, it is therefore in many cases necessary to make tests. 

The most relevant results of laboratory tests are obtained if the  solution used is identical with that which occurs in practice. This  includes any effect impurities may have on corrosion. It is even  better to expose test pieces to the actual process or environment concerned. Weighing and microscopical examination of the test specimens after a certain period of exposure will give a good idea of the corrosion risks to be expected.

Advice on materials selection

When there is some doubt about the materials selection, it is always advisable to contact the technical service of the supplier of the material. It is very important to furnish full information about the corrosion conditions concerned.

The following information is necessary:
  • Corrosion environment (including chemical formula if possible)
  • Concentrations (if possible also pH)
  • Content of impurities, e.g. Cl-, oxidising agents etc.
  • Temperature

Information concerning the type of structure, preferably with sketches, drawings or process descriptions, previously used materials, flow velocities, temperature variations, service life requirements etc., is also very valuable.

 

Explore Corrosion Tables in the Steel Finder

Steel Finder

For mild to high corrosion

Outokumpu Classic Family

Our Classic family combines the most commonly used stainless steel for mildly to high corrosive environments

Core

Corrosive environments

Read more

Moda

Mildly corrosive environments

Read more

Supra

Highly corrosive environments

Read more

For demanding applications and end uses

Outokumpu Pro Family

Our Pro family offers stainless steel products for specific applications or demanding end use.

Forta

Duplex and other high strength

Read more

Ultra

Extremely corrosive environments

Read more

Dura

High hardness

Read more

Therma

High service temperatures

Read more

Prodec

Superior machinability

Read more

Product Page

Special surfaces for stainless steel

Read more